CN
Vibration Monitoring Protector
Product Introduction： I. Main Technical Indicators: Synchronous sampling, 24-bit version, 3.5-inch touch display, numerical display of channel measurement variables on human-machine interface, resolution accuracy 0.1 per unit, proportional progress bar display of channel measured values, separate
-
Update Time：
-
Visits：
telephone
13915255465
# I. Main Technical Specifications: Simultaneous Sampling, 24-bit Version
3.5-inch touch screen for human-machine interface
Digital display of channel measurement variables with resolution accuracy of ±0.1 per unit
Proportional progress bar display for channel measured values with 1% resolution accuracy
2 channels of vibration sensor input (compatible with ICP/IEPE acceleration/velocity sensors, magnetoelectric velocity sensors (dual-switch displacement supported), and eddy current displacement sensors)
2 channels of analog output (4~20mA output by default, 2-10V output optional)
2 channels of TDM signal output
4 channels of switching relay outputs (user programmable configuration), rated at 250V AC 5A / 30V DC 5A
Adjustable parameters for each channel including sensor sensitivity, alarm threshold, danger threshold, alarm delay, measuring range, etc.
MODBUS RTU (485) communication supported
Power supply: 85-305 VAC, 90-430 VDC
# II. Temperature Characteristics
Storage temperature range: -50 ~ +100°C
LCD operating temperature range: -20 ~ +70°C
Circuit operating temperature range: -40 ~ +85°C
# III. Electromagnetic Compatibility
EN 61000-6-4/A1:2011
EN 61000-6-2:2005
Previous Article：Standard TSI Monitoring and Protection System
Return list
Next article：Two-out-of-three overspeed protection device
MESSAGE
